Regulations of Connecticut State Agencies
"Pilotage Units" as used in this Rule shall be determined by multiplying the overall length of the vessel by the extreme breadth by the depth to the uppermost continuous deck and dividing the total by ten thousand, as expressed by the following formula:
Pilots shall first round off any fraction of an inch to the nearest inch and change the feet and inches to feet and decimal part, using the scale below.
|
Inches |
= |
Feet |
|
1 |
.083 |
|
|
2 |
.167 |
|
|
3 |
.250 |
|
|
4 |
.333 |
|
|
5 |
.417 |
|
|
6 |
.500 |
|
|
7 |
.583 |
|
|
8 |
.667 |
|
|
9 |
.750 |
|
|
10 |
.833 |
|
|
11 |
.917 |
|
|
12 |
1.000 |
In cases where vessel’s particulars are listed in meters, the pilot shall use the constant 35.314665 in the conversion, as below:
In both cases, the number of pilotage units should be rounded off to the nearest hundredth or two decimal points.
(Effective February 26, 1981; Amended February 1, 2008)