Regulations of Connecticut State Agencies
(a) The ring padding shall be in good and safe condition, at least 1 inch in thickness throughout, laid evenly and extending to and around the outside of the flooring and apron of the ring.
(b) All turnbuckles shall be properly padded.
(c) The ring apron should not be more than 36 inches wide.
(d) Ring posts shall be made of metal not less than three inches in diameter and must be protected by appropriate padding. The posts shall extend from the floor of the building to a height of 58 inches above the ring floor.
(e) There shall be 4 ring ropes and each not less than 1 inch thick in diameter; the lower rope shall be 18 inches above the ring floor, the second rope 30 inches above the ring floor, the third rope 42 inches above the ring floor and the fourth rope 54 inches above the ring floor. Each rope shall be wrapped in soft material.
(Effective June 21, 1991; TransferredJuly 27, 2007)